APV Quick Release Carrier

MODEL: SKU: PART:

The APV QR allows the user to customize their coverage to suit specific tactical maneuvers and is compatible with a spectrum of options currently offered by PROTECH® Tactical including detachable ballistic yoke, groin and biceps. The quick release mechanism allows the front and rear of the vest to be released through a single pull of a deployment handle located in the center upper torso on the front carrier. This provides the ability to remove the carrier quickly and effectively when the need arises. The quick release functionality has been streamlined by using a quad buckle system which is situated on the bottom front portion and the shoulder areas of the vest for ease of reassembly after the vest has been deployed.

Images

PROTECH® Tactical APV QR (Quick Release) Carrier with Advanced Webless System

The APV QR allows the user to customize their coverage to suit specific tactical maneuvers and is compatible with a spectrum of options currently offered by PROTECH® Tactical including detachable ballistic yoke, groin and biceps. The quick release mechanism allows the front and rear of the vest to be released through a single pull of a deployment handle located in the center upper torso on the front carrier. This provides the ability to remove the carrier quickly and effectively when the need arises. The quick release functionality has been streamlined by using a quad buckle system which is situated on the bottom front portion and the shoulder areas of the vest for ease of reassembly after the vest has been deployed.

Read More

Details

Product Actions

Add to cart options

Additional Information

Print
  • Centrally located, ambidextrous quick release pull strap
  • Cable and buckle quick release system
  • 360° 1-inch modular webbing platform for customized tactical pouch attachment and cummerbund adjustment
  • External, front and back plate pockets designed to accept multi-size hard armor rifle plates
  • Front and back hook & loop ID attachment platforms
  • Upper arm (bicep) protection attachment system
  • Built-in mic tabs
  • Rugged, durable 1,000-denier Cordura® outer carrier
  • Internal cummerbund
  • Adjustable outer cummerbund
  • Dual internal wire channels
  • Dual, removable weapon retention
  • Removable NIJ Type IIIA front and back ballistic panels
  • Rear officer down strap
  • Groin attachment system
Print

An officer's body armor only performs at its best when it is properly taken care of. This product care section should serve as an educational platform to teach you the proper ways to care for your newly acquired body armor.

 

It is extremely important that you read and fully understand this section prior to using your armor.

 

Maintenance

Taking a pro-active approach to maintain the integrity of your body armor will prove to be a vital part of ensuring its longevity and durability.

DO NOT:

  • Use a clothes dryer
  • Bleach
  • Hang Iron
  • Use tape

 

Cleaning your armor panels and plates

 

Your armor panels are what contain ballistic-resistant fibers that perform in an effort to stop a bullet. PROPER CLEANING OF YOUR ARMOR PANELS IS ESSENTIAL. Improper care of your armor panels can lead to premature fiber degrading and compromise the ballistic integrity of your armor.

 

  • DO NOT MACHINE WASH
  • DO NOT ALLOW TO SOAK IN STANDING WATER
  • DO NOT PLACE USE CLOTHES DRYER TO DRY
  • DO NOT DRY IN SUNLIGHT
  • DO NOT USE HARSH CHEMICALS (Such as strong detergents, bleach or fabric softener)

 

  1. Remove the armor panels, trauma inserts and special threat plates from the carrier.
  2. Gently wipe the armor panels with a damp sponge and a mixture of cool water and mild antimicrobial soap or mild laundry detergent.
  3. Wipe off excess soap with clean water and a damp sponge. Wipe dry. DO NOT HANG OR LINE DRY. DO NOT PLACE IN THE SUN.
  4. Ensure panels are completely dry before reinserting into the carrier.
  5. Make sure the panels are reinserted properly with the “strike face” side facing away from your body.

 

Be sure to engage the shoulder suspension which secures the armor panel to the carrier garment.

 

Cleaning your Carrier and Tactical Accessories

 

  1. Remove all armor panels (front and back, groin, biceps), special threat plates, pouches and ID patches before attempting to clean the carrier.
  2. For non-removable accessories such as some yokes, biceps and groins use a clean, damp cloth and mild anti-microbial soap to wipe them clean.
  3. Detach all fixed hook and loop fasteners.
  4. Use a soft, clean cloth in a back-and-forth motion to remove dust, dirt and loose matter.
  5. To treat tough spots on the carrier’s exterior, use a soft brush with antimicrobial soap and water. Wipe off excess soap with a clean, damp cloth.
  6. Lie carrier on a flat surface and allow to air dry.
  7. Make sure the carrier is completely dry before inserting armor panels, trauma inserts and special threat plates.